Re: PASV 4 pickup adjustment screws ques
There are several different adjustment screws you could be referring to.
There are the module height screws, medium-sized hex-head screws located under the module. to raise the whole module, first loosen the two large phillips head screws on the top and then turn these four screws each the same amount, counterclockwise.
The individual pickups have three screws each for height adjustment, as shown on the diagram on this page:
http://www.stick.com/instruments/pickups/pasv4/and the balance trimpot for balancing the bass relative to the melody outs in mono is on the melody side of the module (also shown in the diagram).
I hope that helps. Let me know if you have any more questions.
Happy Tapping,
Greg