Hi,
I'm interested in getting a Tagg interface when they're available again.
In the meantime, does anyone have the dimensions for one of these? It doesn't look too complicated to make... or to ask a friend to make for me
| Stickist.com https://stickist.com/ |
|
| TAGG 3.0 https://stickist.com/viewtopic.php?f=4&t=13986 |
Page 4 of 7 |
| Author: | ReyStick [ Sun Jun 09, 2019 5:54 pm ] |
| Post subject: | Re: TAGG 3.0 |
You might wany to ask gpoorman. |
|
| Author: | Boaz [ Sun Jun 09, 2019 10:06 pm ] |
| Post subject: | Re: TAGG 3.0 |
Quote: I think sitting like Robert Culbertson does or standing up using a TAGG would work better for me than a belt. have you tried the Lapdawg? life changer for me |
|
| Author: | liquidbrain [ Mon Jun 10, 2019 7:02 am ] |
| Post subject: | Re: TAGG 3.0 |
Hi Boaz -- Quote: have you tried the Lapdawg? I'm really intrigued by the Lapdawg. I'm going to try and go to the hardware store this weekend and get a piece of wood that slides through the belt hook. (Basically a really cheap DIY Lapdawg.) If the sitting position seems like it will work for me, I'll probably end up springing for the Lapdawg. I bought this off Amazon with the hopes of whittling it down to fit in the belt hook, but it's more PVC pipe than padding and probably not worth the time trying to get a square peg to fit in a round hole, so to speak: https://smile.amazon.com/gp/product/B00 ... UTF8&psc=1 |
|
| Author: | bachdois [ Mon Jun 10, 2019 2:18 pm ] |
| Post subject: | Re: TAGG 3.0 |
I have a Lap Dawg on all my sticks but you might want to check the Dbro Holder: best do it yourself, simple, most effective way to play seated... viewtopic.php?t=8204 Enviado do meu iPhone usando o Tapatalk |
|
| Author: | Big George Waters [ Mon Jun 10, 2019 10:27 pm ] |
| Post subject: | Re: TAGG 3.0 |
I actually went and ordered a Lap Dawg - but sadly, the hole pattern does not match my mid 80s Ironwood, and I'm not about to re-drill things - so I am still trying to find the proper solution including something very similar to what is in the picture here: *Disclaimer - it is a teflon instrument but the design is pure brilliance, because the ebony block picks up the existing hole/insert pattern on the back of this instrument, and it is an ebony block made by a luthier in Oregon. The rod is carbon graphite I believe, and allows this instrument to be played either seated - like a cello - or standing - like an old Ampeg Baby bass [it has that much range, and I am 6ft 7in tall !!] I'm trying to figure out if it is possible to make something similar that can interface with the belt holder on the Sticks, easy on/easy off - and have a similar peg, but with much less adjustment [like a cello] That's what I would like to try. The Lap Dawg is made exceptionally well, it just does not line up with my Ironwood # 1855... so right now I'm using square sticks as an experiment - across my lap - just to get an idea as to how high I'd like my Ironwood to be. I may also experiment with another square stick I got, and a spring clamp - place the square rod into the belt clip and use the spring clamp for tension, but I can already see that angle is going to come into play, and it won't work because nothing is square. But this picture is worth a peek - perhaps someone will get an idea as to how to make such a block for the Stick..... |
|
| Author: | Big George Waters [ Mon Jun 10, 2019 10:32 pm ] |
| Post subject: | Re: TAGG 3.0 |
I also - crazy as this might sound - thought about seeing if it would be possible to modify a canoe thwart - because that is shaped very similar to the Dbro Holder... This possibility I will research some more, because I did have success with a hardwood branch that I found in my garden that was not only shaped just right - it was also the right thickness... Will advise if I am able to come up with anything that actually works with a Stick and makes sense. |
|
| Author: | Ted S. [ Thu Jun 20, 2019 8:02 am ] |
| Post subject: | Re: TAGG 3.0 |
Hi, I'm interested in getting a Tagg interface when they're available again. In the meantime, does anyone have the dimensions for one of these? It doesn't look too complicated to make... or to ask a friend to make for me
|
|
| Author: | doctordale [ Fri Jun 21, 2019 11:14 am ] |
| Post subject: | Re: TAGG 3.0 |
Kind of a tangent thought... being of a "portly" build... it might be nice if it could have guitar strap buttons on either side of it, then I could velcro some foam to the back of it so that it would sit far enough from my belly that I could play with it standing (without a stand). The belt clip just doesn't work with my almost "Alfred Hitchcock" profile... Yeah, I'm still toying with the idea of a strap solution, and also trying to lose weight. Ken |
|
| Author: | ReyStick [ Fri Jun 21, 2019 11:30 am ] |
| Post subject: | Re: TAGG 3.0 |
doctordale wrote: Kind of a tangent thought... being of a "portly" build... it might be nice if it could have guitar strap buttons on either side of it, then I could velcro some foam to the back of it so that it would sit far enough from my belly that I could play with it standing (without a stand). The belt clip just doesn't work with my almost "Alfred Hitchcock" profile... Yeah, I'm still toying with the idea of a strap solution, and also trying to lose weight. Ken I think a round weighted stand like the old music stands, may be a good option, for moving from standing to seated play. There are so many options. I think it's really up to the individual to decide where he feels comfortable. Although it is nice to have a standard that you can work from. |
|
| Author: | liquidbrain [ Wed Jul 17, 2019 7:22 am ] |
| Post subject: | Re: TAGG 3.0 |
Any TAGG 3.0 updates? I had a chance to play with a TAGG at Interlochen; I think it was an older model (1.6 if there is such a thing). Regardless: I loved it!! So I will definitely be interested in the next TAGG batch to be released when it happens.... (Also: I did pick up a Lap Dawg and I really like it a lot.) |
|
| Page 4 of 7 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|