|
It is currently Sat Jun 15, 2024 3:40 pm
|
View unanswered posts | View active topics
Monopod stand for the Chapman Stick
Author |
Message |
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
Another great idea. I was thinking about the same idea. I will know more as I begin to play and use the monopod. I'm in the final stages of development, so it won't be long before I start to use it. meugel wrote: WerkSpace wrote: I wanted to keep my design as closely aligned to the Stick body angle as possible. It was just an input as to how the whole thing could work together with the existing hardware. Perhaps you will need a double spike to keep the Stick from spinning while you're playing? Or a sort of a "flat spike"??? I never tried a thing like that, but the idea is worth trying.
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Wed Sep 07, 2022 5:03 pm |
|
|
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
Here's a photo of today's progress. It's not the prettiest job, but it should be functional. I still have a few more things to do: I'm considering to paint the plywood base block a solid color for aesthetic reasons. I need to make a cover for the top of the monopod, again for aesthetic reasons. I need to attach the base mount to the Stick with VHB tape. Other than that, the project is looking ok. It will hopefully solve my standing and sitting issues while playing the Stick. I mostly play while laying down on my back.
You do not have the required permissions to view the files attached to this post.
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Wed Sep 07, 2022 5:13 pm |
|
|
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
I've decided to paint the base mount a metallic silver color. This will somewhat match the color of the monopod .
The attached photo shows the first coat of paint. More sanding and paint is required for finishing.
I've found some thin 3M VHB tape to mount the base to the Stick. I decided to also use two small countersunk screws as added insurance. With these two methods of fastening, the Monopod should be a success.
You do not have the required permissions to view the files attached to this post.
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Wed Sep 07, 2022 9:36 pm |
|
|
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
Today, I finished the installation of my home built Chapman Stick monopod. The only thing left to do, is make a cover for the top of the square tube for aesthetic reasons. I've spent some time playing the Stick at different heights. It's fun to be able to walk around the instrument while playing it. I think that this setup will work fine for my purposes. It has been a fun project and I'm pleased with the final product. Photo attached.
You do not have the required permissions to view the files attached to this post.
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Thu Sep 08, 2022 11:24 am |
|
|
paul
Joined: Sat Oct 31, 2020 2:46 pm Posts: 9
|
Re: Monopod stand for the Chapman Stick
Finished my prototype as well. It's good but not perfect. Putting the leg to the player's left of the stick seems like a mistake, because when your stomach bumps against the stick it's able to spin away from you. I need a stiffer assembly of some kind to limit oscillation. Partly it's because I used a thin leg, but much of it is coming from the belt hook itself flexing (it's an old-style hook--are new ones stiffer?). I'll have to make a shorter version for seated play at some point.
You do not have the required permissions to view the files attached to this post.
|
Fri Sep 09, 2022 5:36 pm |
|
|
DavidWS
Multiple Donor
Joined: Fri Sep 03, 2021 1:54 am Posts: 1146 Location: North West Scotland
|
Re: Monopod stand for the Chapman Stick
paul wrote: Finished my prototype as well. It's good but not perfect. A very interesting idea Paul. paul wrote: much of it is coming from the belt hook itself flexing (it's an old-style hook Flexing of the hook & its mount are an issue with the Sitdown/Standup stand I made based on a cymbal stand. Even though the Stick is firmly clamped there's still a significant level of 'bounce' through that mount. The 'bounce' is there both with my Ironwood #1642 from 1985 and my Graphite #5862 from 2013. It may be a little less with the newer Stick, but the difference is small enough it's hard to be sure? PS. Is that a 3 digit serial number I can make out on the headstock? Maybe #724?
_________________ David More Stickists than you can shake a Stick™ at? (a list) Bamboo 12 #7472 Stickup 7+5 Parallel 4ths (C#1 F#1 B1 E2 A2 G#1 C#2 F#2 B2 E3 A3 D4) Bamboo 12 #5826 PASV4 7+5 Parallel 4ths Graphite 10 2009 #5862 PASV4 Classic (For Sale)
|
Sat Sep 10, 2022 1:53 am |
|
|
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
Hey Paul, my 1978 had the aluminum belt hook on it. It did bounce when I had it installed on my original Stick Stand. viewtopic.php?f=4&t=12070I like my telescopic monopod very much. It's so much fun to use. My next little project is to design a belt hook for the Zoom H4N pocket amp. I've ordered some shorter cables from Amazon, so that I won't be dragging any cables around while practicing. The H4N will be powered from a 26800mAh USB flat pack battery. I ordered a 6" USB power cable to connect the flat pack to the H4N. I've ordered a 36" stereo to dual mono cable to attach the H4N to the Stick. I use WESTONE in ear monitors while practicing. They are a good choice for musicians. https://westoneaudio.com/Several months ago, I bought the Zoom F6 field recorder with float mode recording. I also purchased a 10ft carbon fiber pole and the RODE NTG5 mic. This was for another project that I was working on. Although the F6 doesn't have any effects, it's yet another option as a portable Stick amp. It can record up to 6 inputs at the same time, while catching the slightest whisper to the loudest tones without clipping on all channels simultaneously. https://zoomcorp.com/en/ca/handheld-vid ... orders/f6/https://rode.com/en/microphones/shotgun/ntg5
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Sat Sep 10, 2022 3:26 am |
|
|
paul
Joined: Sat Oct 31, 2020 2:46 pm Posts: 9
|
Re: Monopod stand for the Chapman Stick
DavidWS wrote: PS. Is that a 3 digit serial number I can make out on the headstock? Maybe #724? Good eye, I can't read it and I took the picture. #714, came up on SE's used stick page a few years ago. I've seen that flexing you refer to in videos of the cymbal stands. I guess now I know why!
|
Sun Sep 11, 2022 6:54 pm |
|
|
SteveS
Multiple Donor
Joined: Sun Jan 10, 2021 4:07 pm Posts: 644 Location: Detroit
|
Re: Monopod stand for the Chapman Stick
WerkSpace wrote: I like my telescopic monopod very much. It's so much fun to use.
It seems that the stick would tend to rotate. What is keeping it oriented properly – perhaps your hands or the shoulder strap?
_________________ >>=Steve=>> I require quotation marks when I say I'm a "musician"! Rosewood #1027 Baritone Melody, StickUps Blue Railboard #7228 Matched Reciprocal, EMG block
|
Tue Sep 13, 2022 6:20 pm |
|
|
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1799 Location: Calgary, Alberta, Canada
|
Re: Monopod stand for the Chapman Stick
Steve, no issues so far. Just having fun. (No shoulder strap) I'm currently working on the H4N - with 26,800 mAh battery pack setup. I've used velcro to attach them to each other, and added a 6 inch power cable. My next task is to figure out how to design a method of hooking them on to my belt. I received the 1 meter stereo to dual mono cable, but my custom cable sounds better. There's a bit of floor noise generated with the new cable. My design uses XLR cables. The stereo to XLR adapter fits on the Stick. The dual mono to XLR cable is custom made. The advantage of this system, is that I put whatever length XLR cable extension in between. The floor noise on this system is almost non-existent. It's a great system. SteveS wrote: WerkSpace wrote: I like my telescopic monopod very much. It's so much fun to use.
It seems that the stick would tend to rotate. What is keeping it oriented properly – perhaps your hands or the shoulder strap?
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Tue Sep 13, 2022 9:09 pm |
|
|
|
Who is online |
Users browsing this forum: No registered users and 37 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|