|
|
|
It is currently Sat Apr 27, 2024 9:39 am
|
View unanswered posts | View active topics
|
Page 1 of 1
|
[ 5 posts ] |
|
Block ACTV-2 on Grand Stick - Low C String Volume Issue
Author |
Message |
Travis59j
Joined: Sun Mar 05, 2023 9:44 pm Posts: 16
|
![Post Post](./styles/serenitydarkblue/imageset/icon_topic_latest.gif) Block ACTV-2 on Grand Stick - Low C String Volume Issue
I have a grand stick with an ACTV-2 pickup. All of the strings are fairly well balanced for volume, with the exception of the lowest C bass string. It’s volume is noticeably lower than the low G string next to it.
I tried raising the side of the EMG pickup under the C string. That seemed to help a little, but still not quite there. Any advice for things I could try?
I thought about getting more of the damping tape and stacking another little slice under the G string to lower its volume, but don’t know if it would work or how it might change the sound.
Thanks! Travis
|
Wed Feb 07, 2024 12:53 pm |
|
![](./styles/serenitydarkblue/theme/images/spacer.gif) |
WerkSpace
Elite Contributor
Joined: Tue Mar 17, 2015 11:19 pm Posts: 1742 Location: Calgary, Alberta, Canada
|
![Post Post](./styles/serenitydarkblue/imageset/icon_topic_latest.gif) Re: Block ACTV-2 on Grand Stick - Low C String Volume Issue
Is it possible that you might have a faulty string? Try a different string in that location and see what happens.
Another thing to try, is installing a different gauge string in the same location, to see if it's an EQ problem?
_________________ #404 Stick - (1978) Angico hard wood. #6460 Railboard - Black with glow inlays.
|
Wed Feb 07, 2024 5:47 pm |
|
![](./styles/serenitydarkblue/theme/images/spacer.gif) |
adouglas
Multiple Donor
Joined: Fri Jan 25, 2019 11:07 pm Posts: 91
|
![Post Post](./styles/serenitydarkblue/imageset/icon_topic_latest.gif) Re: Block ACTV-2 on Grand Stick - Low C String Volume Issue
I know next to nothing about the ACTV-2 specifically, but general food for thought....
Pickups, especially those with strong magnets in them (e.g. neodymium) can actually dampen strings if set too close.
When playing with pickup height, you might also try lowering it just to see what happens.
_________________ Heri historia. Cras mysterium. Hodie donum est. Carpe diem.
|
Thu Feb 08, 2024 9:11 am |
|
![](./styles/serenitydarkblue/theme/images/spacer.gif) |
Scronk
Site Donor
Joined: Thu Oct 22, 2015 4:21 am Posts: 288 Location: Straya
|
![Post Post](./styles/serenitydarkblue/imageset/icon_topic_latest.gif) Re: Block ACTV-2 on Grand Stick - Low C String Volume Issue
On my ACTV2 there were 2 small and thin metal shims to slightly reduce the output of strings 7,8 for balance of the sound. These were originally fitted by Emmett. You could email SE to ask about these - and string heights too?
HTH
_________________ =//====> #1817 10-string padauk/paua ACTV2 EMG flaps+rails Deep Baritone Melody inner 10 strings of Matched Reciprocal 12 Stand-up Stick Stand (SUSS) - easy DIY project
|
Thu Feb 08, 2024 1:08 pm |
|
![](./styles/serenitydarkblue/theme/images/spacer.gif) |
Travis59j
Joined: Sun Mar 05, 2023 9:44 pm Posts: 16
|
![Post Post](./styles/serenitydarkblue/imageset/icon_topic_latest.gif) Re: Block ACTV-2 on Grand Stick - Low C String Volume Issue
Thanks! Great ideas!
Since my original post, I lowered the height of the C string. This made a noticeable difference. So now, I may try the suggestion to lower the pickup, which I’d previously raised.
Bottom line, I think I’m now in the ballpark.
|
Thu Feb 08, 2024 3:12 pm |
|
![](./styles/serenitydarkblue/theme/images/spacer.gif) |
|
|
Page 1 of 1
|
[ 5 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 147 guests |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|