| Stickist.com https://stickist.com/ |
|
| ACTV2 https://stickist.com/viewtopic.php?f=2&t=12544 |
Page 1 of 1 |
| Author: | Kris [ Fri Oct 06, 2017 12:28 pm ] |
| Post subject: | ACTV2 |
Has anyone tried to mod this pickup so that in mono mode both sides go to ring instead of tip? This would save me having to go through ABY boxes. Thanks... Kris |
|
| Author: | Karma [ Fri Oct 06, 2017 6:02 pm ] |
| Post subject: | Re: ACTV2 |
Perhaps an easier solution would be to make a TRS cable hat swaps the tip / ring on opposite ends of the cable? |
|
| Author: | jaap [ Sat Oct 07, 2017 5:20 am ] |
| Post subject: | Re: ACTV2 |
should be fairly easy. I'm pretty sure the battery is not switched from the ring (unlike most active guitars and basses), so you'd only have to swap the ring and tip wires. Jaap |
|
| Author: | john.e [ Sat Oct 07, 2017 6:58 am ] |
| Post subject: | Re: ACTV2 |
Just use a mono guitar cable. Or do you need to switch on the fly between mono and stereo? |
|
| Author: | Kris [ Sat Oct 07, 2017 7:21 am ] |
| Post subject: | Re: ACTV2 |
I'd like to be able to switch on the fly. I half recall a discussion here about this long ago talking about noise being induced if the ring and tip are swapped, but I can't seem to find it. Kris |
|
| Author: | snoitan [ Thu Oct 19, 2017 12:05 pm ] |
| Post subject: | Re: ACTV2 |
I had a 12 string with PASV-4 that had the wires swapped. Worked fine and I didn't experience any extra noise with it. |
|
| Page 1 of 1 | All times are UTC - 8 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|