It is currently Tue Mar 28, 2017 6:49 am




Post new topic Reply to topic Bookmark and Share  [ 28 posts ]  Go to page Previous  1, 2, 3
 How the pickups sound... (reprise) 
Author Message
Contributor
Contributor

Joined: Mon Dec 31, 2007 1:46 am
Posts: 156
Post Re: How the pickups sound... (reprise)
I'd go for the FT. I guess the FTC is a newer type, didn't know that one yet...
The FT is already very bright, I'm afraid more highs would be too much on the Stick.


Fri Feb 10, 2017 9:38 am
Profile
Resident Contributor
Resident Contributor
User avatar

Joined: Tue Feb 23, 2010 8:27 pm
Posts: 471
Post Re: How the pickups sound... (reprise)
If you look on the specs for both pickups
http://www.emgpickups.com/media/product ... 0172re.pdf
It shows the FT has a resonant frequency of 4.85 Khz and the FTC is 530 Khz. So basically the FTC will be brighter.

Other than that I guess you could look up the difference in Alnico and Ceramic pickups.

One more thing. Make sure you have room for the pickups under the strings. My Sticks are from before there were multiple pickup choices and the depth of my pickup channel is less than the depth of many pickups. The new Stick may have a deeper channel. I don't know.

_________________
Russell Keating
http://www.youtube.com/user/rqkeating
My old web page was deleted when Comcast discontinued web page support.
If you want anything from there, IM me.


Fri Feb 10, 2017 8:08 pm
Profile
Contributor
Contributor
User avatar

Joined: Thu Oct 22, 2015 4:21 am
Posts: 139
Post Re: How the pickups sound... (reprise)
Great info, thanks.

Does the EMG use pole pieces or a bar? I'm hoping it isn't concerned with precise string placement over the pickup (that is, I can turn the pickup to 45 degrees and it will still work fine?)


Sent from my iPhone using Tapatalk

_________________
Andy

"1817" 10-string, padauk with paua inlays, ACTV2 EMG, flaps & rails, Baritone Melody


Fri Feb 10, 2017 9:34 pm
Profile
Contributor
Contributor
User avatar

Joined: Thu Oct 22, 2015 4:21 am
Posts: 139
Post Re: How the pickups sound... (reprise)
Woohoo! Very excited. Just been reading about the 18v mod for the EMG's. Definitely going to try that one - seems quite easy. Any experiences?


Sent from my iPhone using Tapatalk

_________________
Andy

"1817" 10-string, padauk with paua inlays, ACTV2 EMG, flaps & rails, Baritone Melody


Sat Feb 11, 2017 3:07 am
Profile
Elite Contributor
Elite Contributor
User avatar

Joined: Wed Oct 14, 2009 8:05 am
Posts: 2112
Location: Stockholm/Sweden
Post Re: How the pickups sound... (reprise)
john.e wrote:
I prefer the active sound but the passive feel.
Kind of my taste as well! :-) I try to achieve such a tone by playing the PASV4 neck PUPs with filters set to the thinnest sound. Even by Jaap´s excellent mp3 round-trip I'm finding my ears mostly drawn to the PAV4 neck, but as said, I'l like it a little thinner with a bit of "EMG sparkle" but still creamy. ANd I always cut a little low bass out of the melody side output to make the Stick blend better as one instrument (rather than sounding like a bass plus a baritone guitar).

I also own a Stickup, that I sometimes pop in on a Grand or SG12 for recordings, but as I perform live so often I mostly keep the PASV4s on my sticks to allow me to swap around tone alterations while playing. There's nothing like adding a distortions stompbox on one side while setting that same side to dual PUPs out-of-phase; it's a melodically screaming tone that works very well at a gig. Nice color together with a volume/swell pedal on just that side's output.

_________________
Cheers / Per
Bamboo SG12+PASV4. Wenge SG12+PASV4. Bamboo Grand+PASV4
(+ Stickup modded to fit as alternating pickup to the PASV4 blocks).
Fractal Audio AxeFx-II

http://www.perboysen.com


Sat Feb 11, 2017 7:23 am
Profile My Photo Gallery
Resident Contributor
Resident Contributor
User avatar

Joined: Tue Feb 23, 2010 8:27 pm
Posts: 471
Post Re: How the pickups sound... (reprise)
In general, for EMG, if you can't see pole pieces on the pickup, then it has a bar inside. To be sure, just look at the specs. EMG has all of their information available on line including line drawings with dimensions of the pickup on the outside and inside. They also list maximum string spacing (based on the magnetic field) so you know how close to the edge you can get.

_________________
Russell Keating
http://www.youtube.com/user/rqkeating
My old web page was deleted when Comcast discontinued web page support.
If you want anything from there, IM me.


Sat Feb 11, 2017 8:21 am
Profile
Contributor
Contributor

Joined: Mon Dec 31, 2007 1:46 am
Posts: 156
Post Re: How the pickups sound... (reprise)
Per, you're right, the PU's out of phase give a very nice distortion sound. It made Brian May fanous... the Bohemian Rapsody solo was played with the middle and front pickup of his Red Special out of phase :-)

And I'm 99% sure that the FT's use a bar magnet.


Mon Feb 13, 2017 12:47 pm
Profile
Contributor
Contributor
User avatar

Joined: Thu Oct 22, 2015 4:21 am
Posts: 139
Post Re: How the pickups sound... (reprise)
Right, so I think I have my plan... 2x 9v batteries for the 18v experience and 4x EMG FTs to do the out-of-phase thing! Plus some metal plate with holes drilled, in place of the Block...


Sent from my iPhone using Tapatalk

_________________
Andy

"1817" 10-string, padauk with paua inlays, ACTV2 EMG, flaps & rails, Baritone Melody


Tue Feb 14, 2017 8:40 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic Bookmark and Share  [ 28 posts ]  Go to page Previous  1, 2, 3


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  

board3 Portal - based on phpBB3 Portal Powered by phpBB © phpBB Group. Designed by Vjacheslav Trushkin for Free Forums/DivisionCore.
Heavily modified by Stickist.com. Stickist.com is an authorized Chapman Stick® site. The Chapman Stick® and NS/Stick™ and their marks are federally registered trademarks exclusively licensed to Stick Enterprises, Inc., and are used on Stickist.com and NSstickist.com with SEI's permission.
Click here for more information.